0Items IN YOUR
QUOTE REQUEST

View in Stainless

FEATURES

K30A - K85A

Single Piece aluminum alloy housing is vacuum impregnated (MIL-STD 276) for protection and sealing.

No secondary finish required but readily accempts paint. Combines light weight with high tensile strength. Precision machined for alignment of bearings and gearing. 

Single piece alloy steel input and worm shaft

High helix angle worm is case hardened (RC 58-60) and ground. Teeth are profiled and radiused for noise reduction and enhanced efficiency. 

Oversized Input and Output bearings 

Input - support positively-retained, high speed shaft for higher shock load capacity. Ideal for frequent starting and reversing appplications.

Includes premium Nitrile® high temperature seals on each end 

Output - for high radial load capability and maximum hollow output shaft diameter. 

Standard hollow output shaft mounting 

Reduces total drive envelope size, weight and cost. Single and double output shafts are availbale upon request. 

Impregnated and machined bearing caps with exterior machined surfaces enable a variety of mounting accessoreis. 

Extra-deep threaded holes for greater support strength. Zinc plated hardware. 

Flange

Standard Nema C flange for easy motor mounting and removal. 

 


SPECIFICATIONS

K30A - Tiny Case - Output Shaft Diameter 0.625 |

Type Output Speed (RPM) Ratio Input HP Output Torque (in.lbs.) Motor Flange
K30A 350.0 5 0.24 35 63 Add to Quote
K30A 250.0 7 0.24 48 63 Add to Quote
K30A 175.0 10 0.24 67 63 Add to Quote
K30A 117.0 15 0.24 95 63 Add to Quote
K30A 88.0 20 0.24 121 63 Add to Quote
K30A 58.0 30 0.24 161 63 Add to Quote
K30A 43.8 40 0.12 99 56 Add to Quote
K30A 28.7 61 0.12 132 56 Add to Quote
K30A 21.9 80 0.12 166 56 Add to Quote

K45A - Output Shaft Diameter 0.75 |

Type Output Speed (RPM) Ratio Input HP Output Torque (in.lbs.) Motor Flange
K45A 250.0 7 1.00 202 56C Add to Quote
K45A 175.0 10 0.75 213 56C Add to Quote
K45A 125.0 14 0.50 194 56C Add to Quote
K45A 83.3 21 0.50 253 56C Add to Quote
K45A 62.5 28 0.50 328 56C Add to Quote
K45A 47.3 37 0.33 277 56C Add to Quote
K45A 38.0 46 0.33 323 56C Add to Quote
K45A 29.2 60 0.25 302 56C Add to Quote
K45A 25.0 70 0.12 163 56C Add to Quote
K45A 17.2 102 0.12 215 56C Add to Quote

K50A - Output Shaft Diameter 1.0 |

Type Output Speed (RPM) Ratio Input HP Output Torque (in.lbs.) Motor Flange
K50A 250.0 7 2.00 413 56C Add to Quote
K50A 175.0 10 1.50 432 56C Add to Quote
K50A 125.0 14 1.00 398 56C Add to Quote
K50A 97.2 18 1.00 486 56C Add to Quote
K50A 67.3 26 0.75 485 56C Add to Quote
K50A 58.3 30 0.75 567 56C Add to Quote
K50A 48.6 36 0.50 447 56C Add to Quote
K50A 40.7 43 0.50 511 56C Add to Quote
K50A 29.2 60 0.33 414 56C Add to Quote
K50A 25.7 68 0.33 461 56C Add to Quote
K50A 21.9 80 0.25 389 56C Add to Quote
K50A 17.5 100 0.25 450 56C Add to Quote

K63A - Output Shaft Diameter 1.25 |

Type Output Speed (RPM) Ratio Input HP Output Torque (in.lbs.) Motor Flange
K63A 250.0 7 2.00 419 56*/145TC Add to Quote
K63A 175.0 10 2.00 583 56*/145TC Add to Quote
K63A 116.7 15 2.00 854 56*/145TC Add to Quote
K63A 92.1 19 2.00 1068 56*/145TC Add to Quote
K63A 72.9 24 1.50 972 56*/145TC Add to Quote
K63A 58.3 30 1.50 1199 56*/145TC Add to Quote
K63A 48.6 36 1.00 882 56*/145TC Add to Quote
K63A 38.9 45 1.00 1070 56*/145TC Add to Quote
K63A 29.2 60 0.75 1005 56*/145TC Add to Quote
K63A 26.1 67 0.50 724 56*/145TC Add to Quote
K63A 21.9 80 0.50 821 56*/145TC Add to Quote
K63A 18.6 94 0.50 880 56*/145TC Add to Quote

K85A - Output Shaft Diameter 1.50 |

Type Output Speed (RPM) Ratio Input HP Output Torque (in.lbs.) Motor Flange
K85A 250.0 7 5.00 1108 140/180TC Add to Quote
K85A 175.0 10 5.00 1441 140/180TC Add to Quote
K85A 125.0 14 5.00 1967 140/180TC Add to Quote
K85A 87.5 20 3.00 1707 140/180TC Add to Quote
K85A 79.5 22 3.00 1854 140/180TC Add to Quote
K85A 62.5 28 3.00 2269 140/180TC Add to Quote
K85A 46.1 38 3.00 2915 140/180TC Add to Quote
K85A 38.0 46 2.00 2253 140/180TC Add to Quote
K85A 33.7 52 2.00 2472 140/180TC Add to Quote
K85A 26.1 67 1.50 2353 140/180TC Add to Quote
K85A 23.6 74 1.50 2319 140/180TC Add to Quote
K85A 18.2 96 1.00 1833 140/180TC Add to Quote

Renderings


Additional content is available.
Enter provided password to open additional site content
Contact us to at info@keltechltd.com to receive a password.

Keltech Ltd.
598 King Forest Court
Burlington, Ontario
L7P 5C1

Toll Free: 1-877-279-4123
Tel: 905-634-8004
Fax: 905-634-3113

info@keltechltd.com

Keltech has received the following certifications: